Puller Cable Clamp
Thanks for visiting our site!
Puller Cable Clamp
Checkout Ebay Auctions For The Cheapest Prices
 |
 Vintage Old Brass M. Klein & Sons Line/Cable/ Wire Puller or Clamp  US $10.00
|
 Snap On battery cable clamp puller CJ92 USA US $12.95
|
| Powered by phpBay Pro |
Check out Amazon:
 |
Greenlee 629 Four Clamp Cable Pulling Grip with Clevis List Price: $498.64 Sale Price: $392.87  |
|
Use to pull in 2 (50.8 mm) or larger conduit. Type of pulls: heavy, long runs. Type of grip: Flexible eye 1/4 (6.4 mm) diameter galvanized steel aircraft cable connected to 2 cable receptacles with 5/8 (15.9 mm) diameter opening and 2 clamping set screws. Select pulling grips with a maximum rated capacity that meets or exceeds the cable pullers maximum pulling force. |
 |
MP-189 |
|
MINI MULE WIRE CLAMP |
 |
Lisle 54150 Battery Terminal and Wiper Arm Puller List Price: $22.45 Sale Price: $16.03 |
|
Removes battery terminals and bolted on wiper arms A dual purpose puller Easily removes stuck battery terminals Tighten knurled cone to force jaws under the cable clamp. Turn center screw to lift clamp off terminal. Also removes bolted on windshield wiper arms that fir over a tapered spline. The puller screw pad is designed to fit the top of the spline post for easy pulling. |
 |
OTC 4611 Battery Terminal Puller List Price: $13.95 Sale Price: $11.48 |
 |
KD Tools 204 Battery Terminal Spreader and Cleaner List Price: $28.74 Sale Price: $15.36 |
|
Sharp teeth effectively clean from the clamp Made with no-slip grip handles Caution: Wear eye protectionClean and spread battery cable terminals with this pliers-type tool. It's simple to use. Simply squeeze the handle to spread the clamp. This is a handy tool to have in your box! |
 |
Park Tool Universal Crown Race Puller - CRP-1 List Price: $119.95 |
|
When it's time for a new headset, bust out the Park Tool CRP-1 Universal Crown Race Puller. This versatile puller can safely remove everything from 1in to 1.5in crown raceswithout marring or compromising your fork like a hammer and chisel would.Product FeaturesMaterial: SteelCompatibility: 1in to 1.5inWeight: One can of chunky soupRecommended Use: PullingManufacturer Warranty: Lifetime |
Here are some more information for Puller Cable Clamp:
Car Battery Cleaning Made Easy
Did you ever go to jumpstart your car, and notice that you can barely see your battery underneath all the gunk? This 'gunk' is actually battery corrosion, which is formed by acid condensation. Since this is formed by acid, a basic chemical solution will do the cleaning trick. Battery acid is actually very easy to clean away with a common household item- baking soda! But still, precautions must be followed. This article will inform you step by step how to clean the battery while keeping safe.
First, you will need to gather supplies for this project. Most of these items you may already have in your home.
Safety glasses or goggles
Box of baking soda
Adjustable pliers with insulated handles
Screwdrivers with insulated handles
A small, stiff-bristled brush (an old toothbrush will work just fine!)
Assorted small open-end and box wrenches
Small metal or plastic scraper
Special battery tools, including a cable puller and cable terminal cleaning brushes
A turkey baster or small funnel
All-purpose household cleaner in a spray bottle
Sponges or clean cloths
A source of ample clean water such as a garden hose or a large bucket and sponge
Rubber gloves for protecting your hands
There are a few safety tips to keep in mind when getting ready to clean the battery. First of all, you safety glasses and gloves must be worn to protect your eyes and skin from sulfuric acid that can linger in the corrosion deposits. Also, this material can eat away at your car's paint, so keep it away from that as well.
Because the amount of dirt and corrosion on batteries may differ from one another, battery cleaning will vary, so some of the steps below may or may not need to be performed. Sometimes, to thoroughly remove severe corrosion and dirt, you may even need to remove the battery from the vehicle.
First, scrape off any white or greenish corrosion deposits with the stiff-bristled brush or small metal or plastic scraper. Next, use the solution of baking soda mixed with water, approximately one heaping tablespoon to each pint of water. Carefully apply it to the outside of the battery and its cable connections with the turkey baster or small funnel. Then, you can use your brush to work the baking soda solution into the heavily corroded areas. If you find that the cable clamps or terminals are badly corroded at the battery, you can disconnect them for easier cleaning. For this, you may need to use pliers, assorted wrenches and a small battery cable puller to disconnect them. You should disconnect the negative first, followed by the positive.
Then, use your battery cable scrapers or brush to remove the corrosion from the terminals, battery posts and hold down clamps and brackets. Flush these parts with your baking soda solution to rid them of any trace of corrosion. After this, wash the outside of the battery, the cable ends and the hold down parts with a liquid cleaner in a spray bottle. After that, use a sponge or rag to get off any remaining dirt or grease. After everything is clean, dry off the battery and all its parts with a dry rag or cloth.
The final step is just reinstalling any part that was removed and tightening everything so it is secure. Reconnect the battery, positive cable first. You're done! You're battery is now safe and clean.
About the Author
Michael Walker is a freelance author providing tips and hints on engine related topics such as
JDM engines
and
remanufactured engines
.
Thanks for visiting!
