Cheap Hand Tools

The Powerbuilt 648796 55-millimeter Honda crankcase pulley removal tool keeps the crank pulley still, allowing users to easily loosen or tighten the crank pulley bolt in most Honda or Acura engines. Constructed of hardened chrome molybdenum steel, it's built to withstand extensive use in the garage, and at 2.2 inches by 5.8 inches by 5.9 inches, it's small enough to get into those tight engine spaces. It's backed by a lifetime warranty.

Tool allows the technician to hold the crankshaft damper when tightening or loosening the crankshaft bolt 50mm hex on holding tool Works on the following Honda and Acura engines: 1990&ndash -1997 Honda Accord 2.2L 4 cyl. - 1996&ndash -1997 Honda Accord 2.7L V-6 - 1998&ndash -newer Honda Accord 2.3L 4 cyl. & 3.0L V-6 - 1992&ndash -newer Honda Civic 1.6L 4 cyl. - 1997&ndash -newer Honda CR-V 2.0L 4 cyl. - 1993&ndash -1997 Honda Del Sol 1.6L 4 cyl. - 2000&ndash -newer Honda Insight 1.0L 3 cyl. - 1995&ndash -1997 Honda Odyssey 2.2L 4 cyl. - 1998 Honda Odyssey 2.3L 4 cyl. - 1999&ndash -newer Honda Odyssey 3.5L V-6 - 1992&ndash -newer Honda Prelude 2.2L 4 cyl. - 1992&ndash -1996 Honda Prelude 2.3L 4 cyl. - 2000&ndash -newer Honda S2000 2.0L 4 cyl. - 1997 Acura CL 2.2L 4 cyl. - 1997&ndash -1998 Acura CL 3.0L V-6 - 1998&ndash -1999 Acura CL 2.3L 4 cyl. - 2000&ndash -newer Acura CL 3.2L V-6 - 1990&ndash -1992 Acura Integra 1.6L 4 cyl. - 1992&ndash -1993 Acura Integra 1.7L 4 cyl. - 1993&ndash -newer Acura Integra 1.8L 4 cyl. - 1991&ndash -1995 Acura Legend 3.2L V-6 - 1996&ndash -newer Acura RL 3.5L V-6 - 1995&ndash -newer Acura TL 3.2L V-6.

? Break loose the crank shaft pulley / harmonic balancer bolt. Designed to properly secure the pulley from rolating during R & R of crank bolt. ? The 50mm hex head armature slips past the lightest of spaces and slides right into the center slot on the pulley. ? Then slide the long bar onto the receiving end of the armature and lock it into position with the securing bolt. For Honda: Accord - 2.2L 4cyl. 90-97, 2.7L 6cyl. 96-97, 2.3L 4cyl. 98 & later, 3.0L V6 98 & later, Civic - 1.6L 4cyl. 92 & later CRV - 2.0L 4cyl. 97 & later Del Sol - 1.6L 4cyl 93-97 Insight - 1.0L 3cyl. all Odysey - 2.2L 4cyl 95-97, 2.3L 4cyl. 98, 3.5 V6 99 & later Prelude - 2.2L 4cyl 92 & later, 2.3L 4cyl. 92-96 S2000 - 2.0L 4cyl. all For Acura : CL - 2.2L 4cyl. 97, 3.0L V6 97 & later, 2.3L 4cyl. 98 & later Integra 1.6L 4cyl. 90-92, 1.7L 4cyl. 93 & later, 1.8L 4cyl. 94 & later Legend - 3.2L V6 91-95 NSX - 3.0L V6 91 & later, 3.2L V6 98 & later RL - 3.5L V6 96 & later TL - 3.2L V6 95 & later

4731A - OTC TOOLS & EQUIPMENT - HONDA/ACURA DAMPER HOLD TOOL

CTA Tools A812 Honda/Acura Harmonic Balancer Pulley Tool; an offset 50mm wrench to remove and install the crank bolt on most Honda and Acura engines; holds the harmonic damper pulley from rotating when removing the pulley bolt. A hole in the center of the tool allows for the use of a socket to loosen or tighten the pulley bolt. For use with a 1/2-Inch breaker bar or ratchet.