Cheap Hand Tools

Thanks for visiting our site!
Dolly Hammer Auto
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Here are some more information for Dolly Hammer Auto:

Repairing Early Model Cars

On early model vehicles the metal was thick, which had advantages and disadvantages. First of all, they had a lot of metal to work with. This allowed body men to hammer, dolly and pick on the metal, then file the top surface knocking the high areas down. Then they could repeat the process, work the metal and file the surface level. This allowed the body man to metal finish much of the damages without the need of body fillers. This is called metal finishing. If there were still a few imperfections remaining, the body man would use lead to fill the lows and file the surface level and smooth.

Advantages and Disadvantages

The advantage they had was the possibility to straighten and work the metal without the use of fillers. If we tried to use those methods on vehicles today, we would have a hole in the part from filing through the part. If we didn't file a hole through the part, it would be very thin and weak. Another advantage of working on early model vehicles is being able to get to both sides of the panel. Vehicles today have limited access. It is hard to get behind most panels to use the hammer and dolly method. The disadvantage of working metal on early model cars was the strength of the thick steel; it hard to move, unlock, and reshape. It took a lot more force to move the thick metal when straightening. The lead filler that was used also took more time and skill to fill the small imperfections. We are also more educated about lead today and the safety hazards of it.

Repairing Vehicles of Today

Today's vehicles are thinner and have very limited access. However, improved fillers, such as body filler and tools have made the job easier. The most common tool to use for repairing dents is a stud nail gun. The cost of a stud nail gun ranges between $200 to $500. This tool tacks a small nail to the surface. Then you get a slide hammer or t-handle to pull on the nail. Therefore, you tack the nails to the low areas and lightly tap on the high areas with a body hammer. It is important to do this at the same time. Just pulling out on the low area will cause the metal to be over pulled and stretch the metal. Just hammering in on the highs may cause the entire area to be hammered in too much. This is referred to as chasing your damage around. It is always better to have multiple forces at one time. You need to think of it as rolling the damage out, rather than hammering or beating it out. The metal wants to go back to its original shape, you just need to help persuade it to. Forcing metal will result in stretched metal.

KISS Keep It Simple Silly

When you have access, a hammer and dolly can be used. This is probably going to be the fastest way to repair the damage if you have access. When performing auto body repair, think like electricity. Electricity move where ever it is easiest for it to pass through. The path of least resistance. This is why a ground wire is used on homes. If lightening hits your house, it will follow that ground wire that is attached to a ground rod that in hammered in the ground, as that is the path of least resistance. When determining how to repair a dent, just try to think of what would be easiest. Just because you have an expensive piece of equipment does not mean that you have to use it every time. If you can reach behind the panel and pull out on the low with one hand and push down on the high with the other hand, then simply use your hand to repair the damage. It may still need a little hammer and dolly work afterwords, but I have repaired many dents with nothing but my hands. Remember today's metals are thin and it does not take much to dent or repair it.

What Ever It Takes

Whether you're working on early or late model vehicles, just remember to select the tools that will make the job easiest to repair. Don't over work the thin metal on late model vehicles, as the metals are thin. The use of body filler will help repair the surface back to its original shape.

To learn visit the simple secrets to body repair. There you can learn more about collision repair and painting.

I am a lead collision repair instructor for a college. We teach our students how to properly repair vehicles. I am ready to teach you too. For free training and learn about auto body repair and painting visit simple secrets to body repair.

Simple Steps to Remove Minor Car Dents

There are a number of reasons as to why a car could be susceptible to dents. Accidents happen unexpectedly and these events are beyond our control. Despite the upmost care you take with handling and dealing with your vehicle, it is still subject to dents. Whatever the size of the dent on your car, they are outright ugly and sometimes costly to remove.

Car dents that you get from accidentally bumping into a garage wall are considered to be minor dents only and these can easily be removed from the vehicle. If you have some skill and knowledge on car dent repair, with the use of the correct tools and equipment, you can remove the dent on your own without too much difficulty. By doing the repairs on your own, you will definitely save some money.

One of the first steps in repairing the car dent is to drill a hole in the center of the dent. This makes it easier to get to the middle of the dent, you can work your way from there once you've drilled the hole. Carefully insert a dent pulling tool into the newly drilled hold and then pull on the tool. Continue to do this until the dent on the car pops out or it appears to be flat. Once you've achieved this, remove the dent pulling tool out of the drilled hole. A dent pulling tool is generally found at your local auto parts store or any automotive merchandise store.

On the other side of the metal sheet, continuously bang out the back of the dent until you achieve a smooth surface. When the dent is finally smooth, start filling the drilled hole with body filler. You can either use a dolly tool or a metal working hammer. These tools can also be found at any automotive parts retail store. Later on, you can cover the area with touch-up paint. If this process is done in the correct manner, you will successfully repair the dent problem and no one would be able to tell that your car was subject to an ugly dent.

Minor car dents can generally be removed on your own, especially if you have some skill and knowledge on auto car dent repair. For major or severe dents, it is always best that you consult with a professional to learn best methods you could do to bring back the original appearance of your car.

About the Author

Dent repair Bridgend
gives you the right advice your car needs. Don't settle for anything less.
Dent repair Bridgend
brings back the original appearance of your car. Get their expert opinion now!

Rob McCarter to compete in auto repair championship
A Heritage High School student is preparing to step into the national limelight and demonstrate his skills in auto repair.

Thanks for visiting!

This entry was posted on Thursday, May 8th, 2008 at 8:34 am and is filed under Hammers Pullers Extractors. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.