Cheap Hand Tools

Thanks for visiting our site!
Cap Oil Filter
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Here are some more information for Cap Oil Filter:

Every good car owner should check their car periodically to make sure it is running properly. Though there are lights on the dashboard to indicate any problems, it is much better to know a little bit about your car, and to keep an eye on the important fluids that are used to run the car. Everyone knows about putting enough gas in the car, but there are some simple steps that should be done about once a week. This is a very good thing to teach any teenager or other new car owner, especially one whose new car is over five years old.

First of all, make a habit of checking your fluids. The older the car the more frequent the checks should be, but at least make them once every two weeks. Having a regular schedule will help in this, for example, the first and fifteenth of every month. In this way, you will have to remember if you have just forgotten to make the check or if you have just done it. Today let's cover checking the oil.

The oil level is one of the most important fluids to check regularly. There is a long thin metal piece, call the dipstick, that slides into a compartment adjacent to the engine. Most dipsticks ended in a small circular, plastic coated ring that you can use to pull it out of its tube. Make sure you see the small hole the dipstick goes into so that you can replace it there to check the oil level. First, make sure the car is parked on a level surface and has been sitting for several hours before checking the oil. This is because the oil is used to lubricate the engine, and takes a while to settle down back into the bottom of the engine. Remove the dipstick, and wipe any existing oil off it using an old rag. Reinsert the dipstick back into its small hole, all the way down so the top of the dipstick is in its normal position. Pull it out once again and notice the light or dark brown liquid that coats the bottom part of the stick. You will notice that there will be markings on the dipstick, indicating low and full levels for the oil. Depending on your car they may have the words "full" and "add", or possibly just two notches or other notation. Generally the fluid should be somewhere near, or possibly slightly over, the full line on the dipstick (the one higher up on the stick). If not, oil should be added to the car. For most cars, the amount of oil between the bottom mark and the full mark is one quart of oil. So, for example, if you are oil comes half way between the bottom and top marks, then you should add approximately one half quart of oil. Add that much oil, wait for a few moments, and then measure it once again. If the oil level is significantly below the bottom mark, add as much as necessary to bring it up to the top mark, and then have a mechanic look at your car for oil leaks.

In order to add oil to the car, there should be a small round cap that can be unscrewed, which hopefully has the word "oil" on it. If it is not clearly marked, ask a knowledgeable person where to add the oil in, for it is crucial to get the right opening. Simply unscrew the cap, add the oil (using an oil funnel if you wish to be neat), and then make sure you replace the cap securely.

Other fluids to check weekly include coolant level, windshield washer fluid, power steering fluid (if applicable), and brake fluid. Also, make a periodic check of tire pressure. How to do these will be covered in other articles.

Car Rental Virginia and Rent A Car Virginia

How to Change Your Own Engine Oil

Most of us know that when the car beeps, it is time to get gas, but that is as far as our narrow scope on good car maintenance goes. For many, a visit to the mechanic only happens when major car problems have occurred. Most mechanics would say that the majority of car problems could be avoided if the car owners only changed their motor oil on a regular basis. With the rising price of gas, many Americans are taking the initiative to learn how to be more car repair friendly in order to avoid spending any extra dollars than they have to on their automobiles.  

Everyone has heard that the first step to maintaining your car’s healthy condition is by changing the motor oil regularly. And we all have seen those signs advertising a 10 minute oil change at local gas stations or quick stop car repairs. But what if there’s a way to save $50 bucks and do it yourself? There is and it’s easy to do. 

Here are the steps you’ll need to get you started in changing your own car’s engine oil.  

The first thing you will need to get started is your car owner’s manual. This will tell you how much and what kind of oil is required. You will need to go down to your local auto parts store and make sure you get the right filter for your vehicle. You will also need to purchase a funnel so that you don’t get any oil spillage on your engine, which could cause major problems. In addition, you will also need a pair of filter pliers or a wrench because sometimes the lid to the oil is stubborn coming off. You will also need the right size socket for your specific vehicle. Note that some cars include the socket with the car’s maintenance kit. If your car doesn’t have this, then you can always find one at the auto parts store. Also, make sure to have a rag around to clean up any accidental spills that may occur. 

Open up the car’s hood and pull your car up onto a ramp. Make sure your emergency brake is on so that the car doesn’t go anywhere while you are changing the oil. Use a drain pan to catch all the dirty oil and place it under the car by the drain bolt. Use a ratchet or a wrench to remove your car’s drain plug bolt. When the oil is drained all the way down to a drip, screw on the drain plug and tighten it with the ratchet or wrench. Next locate your car’s oil filter and use your pliers or wrench to remove it. Before you install the new filter, take some oil and use it as lube on the “o” ring of the filter. Then reinstall the new filter as tight as possible by hand.  

Now that the hard part is done, here comes the easy part. Remove the oil cap from the engine. Place the funnel in the hole and put in the specific amount of oil that your vehicle requires according to the owner’s manual. Screw on the engine oil cap. Start your engine and let it run for a few minutes. Then once you turn off your car, check to see if you have the correct amount of oil in your engine. Congratulations! You have successfully changed your engine oil. 

About the Author

Tim LaGanke, Jr. is president of QuickChange Oil, a 10 minute oil change company in Cleveland, Ohio. QuickChange is currently seeking applicants to own an oil change franchise.
gank@quickchangeoil.com

Are the installation torque requirements printed on all automotive cartridge style oil filter caps?

On all vehicles using a cartridge style oil filter, are the installation torque requirements for the cap itself printed or stamped on the cap? I'm talking about the cap that goes on the filter housing.

Don't know exactly what you have, but be careful not to
overtighten it. Experiment if you must.

Deep-sea mining adds to fears of marine pollution
Concerns about large-scale marine pollution, fuelled by the Gulf of Mexico oil spill, are set to be heightened by a new development in exploitation of the oceans: deep-sea mining.

Thanks for visiting!